Game version that had been officially released on the 15th of May, 2012.
Selected Test Results (selected in 'Test Results' table below)
Installing via Battle.net app.
Logging in to hero list and playing the game.
What does not
Nothing I've found.
What was not tested
Playing for longer than 10 minutes, so no dungeons or anything was tested.
To get the game to run, you need to get a copy of dbghelp.dll into your Diablo folder, set dbghelp to Native in winecfg.
msvcp100 is probably needed set at Native/builtin. Haven't tested it without, as I'm running it in my Battle.net prefix.
To launch the game you need to run the following command:
setarch i386 -3 -L -B -R wine '/path/to/Diablo III.exe' -launch -opengl
Game will not retrieve Hero List if Launched by the Battle.net app.
"Playing the game on Linux, although not officially supported, will not get you banned – cheating will." -- Bashiok
Important info for test results posters
Thank you very much for wishing to spend some time on improving AppDB.
I have to warn you that general AppDB policies forbid (a) accepting test results for patched Wine versions and (b) forbid accepting results obtained from PoL-driven Wine installations, only "vanilla" unpatched Wine or Wine that had came by default with your distro are considered to be valid. I'm really sorry for that, but it is the way it currently is.
For more details feel free to read recent (as of 16th of May, 2012) discussion on wine-devel mailing list.
Aside from the requirements above your test results should comply with some simple rules to be accepted:
Please, test an application under fresh clean wineprefix;
Include exact specs of the computer you had tested an app on (CPU, GPU, amount of RAM and VRAM) in the "Extra Comments" section of the report;
Specify versions of essential software components, most notably: is your system 32bit or 64bit, what is the version of the GPU display driver you use and what is the version of the OS kernel;
Include detailed information on the native dll overrides you had to use in order to get the game working. If you had installed dlls yourself - include complete information on the sources of dlls and the exact steps you took to install them.
Thank you in advance!
Getting Diablo III to run best under Wine
As of Wine 1.5.6 Wine is able to both install and run Diablo III. However, if you are running an older version of Wine (such as the 'stable' 1.4.x branch), then you will need to either upgrade to a newer version of Wine or go through some extra steps each time a patch comes out (see the Historical Information section below).
Q: I have a recent version of Wine (>= 1.5.6) and when I try to install the game the installer seems to be stuck at "0%". A: Make sure you set your Wine prefix to emulate at least "Win XP". There were reports that best results are achived with version set to "Windows 7" or "Vista".
Q: I'm using a recent version of Wine (>= 1.5.6) and trying to install the game from DVD. Installer seems to be having problems with some files missing. A: Mount your DVD with "-o unhide" mount option, it should help.
Q: When I start up the game and try to log in into battle.net I always get "error 3007". A: You're on recent release of Ubuntu (or on any other distro affected by the ptrace bug, Bug #30410) or running a 64-bit OS. If you think you're affected by the ptrace bug then you can try executing the following in a terminal before starting Diablo III: echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope If you are running a 64-bit OS then you need to set the game to only use 3 GB of memory, to do this you'll need to modify the launcher to include "setarch i386 -3 " before calling Wine or launch the game from the game's folder in the terminal, like so: setarch i386 -3 wine Diablo\ III.exe
Q: When I play the game I've got bright red graphical glitches at the places that are expected to be rendered full-black. A: You had enabled forcing anisotropic filtering and/or texture sharpening in the GPU drivers settings utility. Make sure to turn it off into "let an app control it" state and your problem should be fixed.
Q: I'm using Intel GPU from recent series (HD 2000/3000/4000+). When I try to start the game it fails telling that my GPU lacks required features. A: Make sure that you're on recent-enough distro (2012+) which contain fresh-enough Mesa (8,1+) and kernel (3.1+). Then make sure to install S3TC texture compression support lib (it might be illegal to do in some countries; how to install it is out of the scope of this FAQ - google for it) and start the game up from terminal like this: "force_s3tc_enable=true wine "
Q: I'm experiencing game crashes/hangs at certain places of the game world (like "Cathedral", e.t.c.). A: Make sure to update your GPU driver. This problem is known to affect older versions of open source driver for ATI/AMD cards, and older versions of closed-source nVIDIA GPU linux driver. There might be other drivers out there suffering from the same problem we're unaware of, so updating driver won't hurt in any case.
Q: I've got "The application encountered an unexpected error." dialog box right after I start up the game. A: This is most likely due to using builtin Wine's vcrun2008 DLLs instead of native. Try to install VC++ 2008 Runtime into your prefix, it should help. One of the ways to do it is to use "winetricks" script like that: "winetricks vcrun2008".
Q: I'm on Ubuntu and use Unity desktop environment. When I start the game it loads into a shrunk fullscreen where the Unity bar and universal task bar are still visible. A: This is the incompatibility between compiz and many other applications which are considered by compiz to use "legacy fullscreen approach". You can workaround it by switching into using Unity 2D or by installing "Compiz Config Settings Manager" application and use "Legacy Fullscreen" support option found in "Workarounds" section.
Q: I'm using video card equipped with ATI/AMD GPU/APU and when I start up the game all I've got is a "black screen" or a "black window". A: Most likely you had hit a bug in the video card driver. Your best bet would be try to update it to the most recent version. In case you are already using latest driver release (or in case it's hard for you to update video card driver for some reason) you might have some luck workarounding this problem by applying a small registry change to your prefix. What you would want to do is to set "AlwaysOffscreen" key to "enabled" under "HKCU/Software/Wine/Direct3D". You could easily do it with recent enough winetricks by executing "winetricks ao=enabled" for your Diablo III Wine prefix.
Q: I'm using video card equipped with ATI/AMD GPU/APU and the game runs fine but I've got some rendering glitches like "large semi-transparent polygons" or "strange triangle-shaped glitches near light sources". A: It had been reported that due to some unknown reasons (bugs in driver? Wine doing something wrong?) for people using ATI/AMD GPUs it is required to switch Wine's DirectDraw renderer from using OpenGL into using GDI backend. This could be dobe by applying a small registry trick to your prefix. What you would want to do is to set "DirectDrawRenderer" key to "gdi" under "HKCU/Software/Wine/Direct3D". You could easily do it with winetricks by executing "winetricks ddr=gdi" for your Diablo III Wine prefix. Also switching the game to run in "Windowed Fullscreen" mode instead of simple "Fullscreen" might help.
Q: When I play Diablo III I've got extremely low or unstable FPS. My system is equipped with multi-core CPU (dual core or more). A: This problem also happen on native OS but there it manifests itself as a micro-stutter (rapid FPS jitter). Under Wine for some people it gets much worse and could easily render the game into nearly unplayable state. If you happen to suffer from this problem you could try changing so called "CPU affinity" for main Diablo III process to only use one or two cores of your multicore CPU. How to do it depends on the linux distro you use. In any case first step would be to start up the game and then Alt+TAB from it and run your favorite terminal emulator. Possible commands to use are: (a) "taskset -cp 0 `pidof Diablo\ III.exe`" or (b) "schedtool -a 0 `pidof Diablo\ III.exe`". Using "0-1" or "0,2" in place of "0" might give better results, depending on the phase of the moon and the amount of luck you have.
Another way to achieve the same effect it is use Wine's "Task Manager". To do it execute "taskmgr" inside the Diablo III Wine prefix prior starting up the game and then Alt+TAB into it from game and use its built-in functionality to change CPU affinity of the "Diablo III.exe" process. You could do it by right-clicking on "Diablo III.exe" list entry at the "Processes" tab, selecting "Set affinity..." and de-checking all assigned CPUs except for "CPU 0". Don't forget to press "OK" button before Alt+TABing back into the game. For some cases it might be better to assign two cores for Diablo III main process, like "CPU 0" and "CPU 1" for "real multicore" CPUs (all multi-core CPUs by AMD up to but excluding AMD FX and later series; Intel multicore CPUs without HyperThreading support) or "CPU 0" and "CPU 2" for "SMT-faked multicore" CPUs (AMD FX and later; all HT-enabled Intel CPUs which are really multicore - i.e. Pentium 4 CPU which seems to be "dual core" isn't really "dual core" thus it doesn't fit into this category). Try experimenting with CPU affinity a little so you could find the value that suits your system best. To check FPS inside the game you could press Ctrl+R on keyboard. FPS counter would be displayed at the top left corner of the game window.
Using an old version of Wine to play Diablo III
To play on older versions of Wine (<1.5.6) you either need to upgrade Wine, patch Wine to support AcceptEx, or copy a working Diablo III install from another PC and run the game with the "-launch" command-line parameter. The process looks like this:
Copy a working Diablo III install (either from a recent Wine version or a Windows PC).
Open up a terminal and navigate into the folder with the
installed game files (it is one where "Diablo III.exe" is located), for
example: cd ~/".wine/drive_c/Program Files/Diablo III/"
Execute the command to run Diablo III without using the launcher: wine Diablo\ III.exe -launch
Repeat this process whenever a new patch comes out.
Patching an old version of Wine to play Diablo III
As of Wine 1.5.6 the patches submitted by Erich were committed and the launcher no longer requires them. If you are using a previous version of Wine, 1.5.5 or earlier, please read below.
To get the D3 installer and launcher to work flawlessly under
Wine 1.5.5 and earlier, recompiling Wine with patches listed below is
needed. You could do it yourself, or you could use pre-built binaries
from third parties (in case you're risky enough to not mind security
threat it imposes). For the moment of the writing of this howto there's
known PPA for Ubuntu-like distros which had been reported to provide a
version of Wine binaries that had been patched to behave well with D3
installed/launcher. It could be found here: https://launchpad.net/~cheako/+archive/packages4diabloiii.
Keep in mind that AppDB maintainers have no idea about what is "inside"
that PPA and carry no responsibility about its contents.
"AcceptEx fix" patchset by Erich Hoover, "older" version
(compatible with Wine 1.5.2 and a number or earlier versions, have known
problems with 64bit arch; use this one only in case "new" version don't
work work you):
Note: after applying any of "AcceptEx" patchsets be sure
to run "./tools/make_requests" from the top level of the Wine source
Fix for the D3D error on game video setting change/restart
If you are using an old version of Wine (<1.5.7) and are
experiencing an issue where you see the dialog "An error occurred
reseting D3D. Click OK to retry" then this patch (taken from Bug #28201) should fix your problem:
On systems with more than 4 GB of memory Diablo III sees an unusual amount of memory (from its perspective) due to differences in the memory layout on Windows and Linux. As a result of this, many aspects of the application will fail to function properly (including the Auction House, chatting, authenticate, and closing the game). To resolve this problem you need to run the game in particular way to tell Linux to use a Windows-like memory address space:
setarch i386 -3 no longer required?
by William on Thursday February 27th 2014, 0:24
I just ran D3 for about 35-40 minutes without using the "setarch i386 -3" trick. I am running a 64bit OS with 6GB of RAM, and I know that I used to require this trick. It has been about 3-4 months since I played, so I have updated wine and other things (running wine-1.7.0 right now).
1. Run winecfg. (If you have multiple prefixes, make sure it is the correct prefix) (If using PoL click on Diablo III and click "Configure")
2. In the 'Libraries' tab, type dbghelp into the 'New override for # library' box. (It's not otherwise listed)
3. Click 'Add', then 'Yes' when it asks if you are sure.
4. Click on 'dbghelp' in the 'Existing_overrides' list.
5. Click 'Edit'.
6. Set to 'disabled'.
7. Click 'OK', then 'OK'.
Diablo 3 and open-source amd drivers
by thathatman on Saturday September 28th 2013, 10:50
I wanted to report that diablo 3 is playable with the amd open-source drivers. It is slightly smoother than fglrx. I do experience graphical glitches in the form of red water.
This is with the playonlinux version of wine on ubuntu 13.04.
rubber banding and flickering fix
by Netsrotti on Saturday August 31st 2013, 2:41
I found that setting StrictDrawOrdering string to enabled in regedit solved the rubberbanding and graphics flickering bug in act3 and when opening too many menues. I'm using latest nvidia binary beta driver.
Found the regkey at wiki.winehq.org/UsefulRegistryKeys
Can only do 2-3 things, then game hangs "out of sync"
by Hauke on Wednesday July 31st 2013, 8:30
First my specs:
- Kubuntu 13.04 with disabled desktop-effects
- installed Diablo3 in a bottle (with Win32 set and Winver=WinXP) from ground up, but problem also occurs when i start my Windows-installed-Diablo3 with wine.
So the good thing is, i can start Diablo3 and everything seemingly works normally, good fps in menu, i can login with my character etc. I can also enter a game and play normally. Also starting an auction works.
But as soon as i do about two to three things in the menu (for example enter the auction house or switch a hero, or leave a game) the game is non-functional. Auctions cannot be started (although the button is clicked, i then wait for about 30 seconds to get the error). Yet the menu looks normal, it's animated etc. Only not usable.
I can - for example - log in, click "resume game" and play for a while. But as soon as i leave the game, and selecting "change quest" does not do anything, and clicking "resume game" brings up Error 316704
It feels like my gameclient and the server get "out of sync", i still can do stuff, but it has no effect on the game.
I then have to kill Diablo from outside the game (since clicking "Exit Diablo3" does not do anything) and restart wine to do more than one or two things.
Do you guys have any advice what could be the reason for this?
Anyone got banned in the last few months?
by vexorian on Saturday June 29th 2013, 17:01
Playing steam games natively reminded me of how much of a compromise it is to have to boot to windows just to play this game. I decided I will not do it anymore. The game itself isn't really worth such annoyances. So I am back to using WINE to play this game. If I get banned, so be it. A good excuse to stop playing this game and avoid buying the expansion.
I noticed there are apparently not any reports of WINE users getting banned ever since the time I got unbanned. I wonder if this is still happening?
by Johan Johnsson on Thursday May 23rd 2013, 11:20
Just wanted to share a problem I had on Manjaro Linux 0.8.5 with Diablo 3.
After my installation when I fired up the game I got an dialog telling me that there was a patch I needed and I could only click accept, then the game quits to the launcher that was telling me that the game was up to date. Fired up the game again to be met with the same dialog.
After much search I found the answer somewhere that a package named "lib32-ldap" worked for someone. So I started to search my package manager for similar file and found a package named "lib32-libldap" and installed it.
And that fixed the problem, now I can play. Hope this is for any use for someone!