You have to make sure that your "$HOME/.wine/drive_c/users/profiles/yourhomefolder/Application
Data/C&C 3/Profiles/your_gameaccount/Options.ini" 'GameSpyIPAddress' fieldagrees with your online ip (for example GameSpyIPAddress = 84.171.46.121) and make sure that file is read-only.
Admin notes: Do NOT submit test results for patched versions of Wine. This is not a true representation of what Wine can achieve.
Do NOT submit test results for PlayOnLinux or anything else that is not Wine.
Do NOT submit test results where Multiplayer has not been tested. Full tests are need to correctly rate an application.
Tests that do not comply will be deleted without warning.
Troubleshooting
Installation
The installer says installation was aborted, even before starting to install files
If you are installing from a CD/DVD, try copying the game disc to your home directory and run it from there.
I chose custom installation and it tells me to select a language pack, even though I have
Use the standard installation mode.
Starting the game
It hangs at the splash screen
Try running winecfg and disable all audio drivers. Of course that is not an acceptable solution, but it will help us to determine where the problem lies.
In-game issues
Some effect settings result in corruption or improperly displayed rendering
Try setting the VFX or Shader quality to a lower setting. Your graphics driver and/or wine may have bugs which result in visual defects at present.
The cursor animation does not play Apply the relevant patches to wine or use a version with the functionality as described in the howto.
The following comments are owned by whoever posted them. WineHQ is not responsible for what they say.
wine-kane
by shaun on Friday December 21st 2012, 0:54
wine-kane does not work on Ubuntu 12.04. There is a new version from compholio
RE: wine-kane by Erich Hoover on
Friday December 21st 2012, 10:23
by MarionStevenson on Saturday October 20th 2012, 2:50
Since the historical-theories-of-water.weebly.com/ historical theories of water, water and tea are two inseparable entities. Camellia sinensis leaves need for being brewed in warmed water. The excellence of the water directly affects the quality in the tea. Therefore, pinpointing the quality regarding water is an essential skill for just about any master tea beer maker.
alt+f4 work now
by keghn on Saturday September 15th 2012, 18:04
I can get out of the black screen now. But
after alt+f4 I get force quit or wait in the black screen
with the game mouse that will move but right click and left
button do not work. I can use the shift key to select force
quit. The emulated window work better at exiting the game
but I can not get the window to fill my screen it maxis
out at about a quarter of my screen at 1600x900.
When I completely leave wine my screen is set to 800x600 in
the non emulated window setting.
I am using wine-1.5.12 on Mint 13.
Game exit to a black screen
by keghn on Thursday August 30th 2012, 20:51
I get a black screen and the game's mouse pointer
on Wine 1.4, and Wine 1.5.11.
I get this on Kane's Wrath. I have not tried Wine on CNC3,
or any other applications.
I ran the game with:
wine cnc3ep1.exe
and
optirun wine cnc3ep1.exe
I got the same results.
Is there a way of getting out of wine. I have been using alt+ctl+f6 to
get out to a new terminal then log back in. I try to run my
x sever "sudo mdm" but the computer tell me is is still running
and cant use it.
If their is an error log tell me were it is, and name of
the file.
I am using Mint 13 64bit mate maya on Samsung series 7
chronos np700z5c optimus laptop using Intel
ivy bridge hd4000 Intel gpu, and geforce gt 630m gpu. Using i7-3615QM
cpu. Optirun make application launch on the nvida geforce gpu
Wine-1.4 update breaks C&C3 and Kane's Wrath
by psytrox on Sunday April 8th 2012, 2:04
After allowing a standard update-manager window alert to install wine-1.4, Command & Conquer 3: Tiberium Wars and Command & Conquer 3: Kane's Wrath will not run. I am able to get through the splash video, but the resolution is different now, and I have it set for windowed mode. When the EA splash is finished, I keep getting the name dialog window; it always appears now. I enter a name and the game(CNC3.exe) crashes with the following terminal output:
...
fixme:d3d:resource_check_usage Unhandled usage flags 0x8.
fixme:thread:SetThreadIdealProcessor (0x368): stub
fixme:thread:SetThreadIdealProcessor (0x368): stub
fixme:d3d:resource_check_usage Unhandled usage flags 0x8.
err:ole:CoGetClassObject class {e2b3c97f-6ae1-41ac-817a-f6f92166d7dd} not registered
err:ole:CoGetClassObject class {e2b3c97f-6ae1-41ac-817a-f6f92166d7dd} not registered
err:ole:create_server class {e2b3c97f-6ae1-41ac-817a-f6f92166d7dd} not registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {e2b3c97f-6ae1-41ac-817a-f6f92166d7dd} could be created for context 0x17
fixme:hnetcfg:fw_manager_QueryInterface interface {00000126-0000-0000-c000-000000000046} not implemented
err:winediag:shader_generate_glsl_declarations The hardware does not support enough uniform components to run this shader, it may not render correctly.
fixme:d3d:resource_check_usage Unhandled usage flags 0x8.
fixme:thread:SetThreadIdealProcessor (0x368): stub
fixme:thread:SetThreadIdealProcessor (0x368): stub
fixme:faultrep:ReportFault 0x335ee18 0x0 stub
err:mmtime:TIME_MMTimeStop Timer still active?!
I attempted to revert wine back to 1.3x, but nothing seemed to make it work again. I have been playing both games without issue for a few weeks, until this update. It may be a kernel problem, as that was a possible additional update at the same time.
Relevant information:
$ wine --version
wine-1.4
$ uname -a
3.2.0-22-generic-pae #35-Ubuntu SMP Tue Apr 3 20:37:36 UTC 2012 i686 i686 i386 GNU/Linux
Sounds cuts out after 5 minutes, then 5/10 minutes later the game crashes
by Throne777 on Wednesday March 30th 2011, 11:00
So after sorting out the 'No DVD' error by applying a No CD/DVD crack, I've been able to get the game to run by forcing it to run windowed. However, the sound cuts out after the game has been running for about 5 minutes or so (regardless of what you are doing, it seems -when the sound is running, the sound isn't synced properly to the cutscenes). Then about 5 or 10 minutes after this, the whole game crashes & closes.
(On a side note, should this game really have a platinum rating? I've tried several times before using earlier versions of wine and earlier versions of Ubuntu & I've never once been able to get it to work properly, each time getting different errors at different points)
Can't even install in Ubuntu 9.10
by Sam on Sunday February 21st 2010, 7:02
I've trawled the posts and other forums and can't seem to understand why I can't run this game on my system. I have wine 1.1.39 for ubuntu and am trying to install Command and Conquer 3. The splash screen comes up and then it just doesn't go any further and stops. The terminal output includes things about NVIDIA and openGL and then a whole lot of d3d9 in it... (it's quite long so I won't post it here)
still cant play via network
by Dmitry on Monday October 12th 2009, 1:01
Hi!
... updated wine from 1.1.30 to 1.1.6(hacked), add string value in registry, configured hosts, but I still cant see users online.
p.s. windows users can see me!
what's wrong?
Vary confused
by Stephen on Wednesday September 2nd 2009, 16:44
Ok I'm vary new to mac and installed Darwin version 1.1.21 and then realized that i needed a new version so i downloaded 1.1.9 I just dragged it to the apps folder and clicked "replace" I'm not sure if that is all it talks to update or if you have to uninstall the old one first. then i put in my T3 disk and double clicked and i got a list of files some of which had the Darwin logo as there icon one was called "AUTORUN.EXE" the other "SETUP.EXE" when i double click ether of them they appear in the process window and a little text box appears saying "version 1" when i close the text box they disappear from the process window
RE: Vary confused by Erich Hoover on
Monday September 21st 2009, 12:17
Crashes if looses focus
by Stefan on Wednesday August 26th 2009, 15:55
I've got it running on ubuntu 9.04 amd64, wine 1.18.
I could solve hanging splash screen by setting up a virtual desktop (800x600) but was able to increase resolution later in the game and to remove the virtual desktop afterwards.
Sound works good (at least for a while) using Esound.
I didn't have time for in depth testing but will post my results.
One issue remains: If the game looses focus (ie: the mouse moves outside the window and clicks) the game will crash.
can't start
by Berillions on Friday August 7th 2009, 13:46
Hello,
I have a problem with this game. I patched the game with the patch 1.09, replace the file by the crack but after launch the game, i can't play because the game want the cdrom.
RE: can't start by Throne777 on
Wednesday March 30th 2011, 10:47
1.1.26 hang 1.1.25 works perfectly
by Matthew Southgate on Friday July 24th 2009, 23:45
In WINE version 1.1.26 it appears to hang during the start up.
The splash screen appears and stays there, but the application doesn't start. In Wine 1.1.25 It works perfectly, and I managed to get Kane's Wrath working without a No DVD crack.
So I reverted to 1.1.25, anybody else get this error?
Not all mouse cursors show
by Edward on Friday July 3rd 2009, 11:56
I used playonlinux to install cnc3, which has done is flawlessly. Network and mouse patches have been applied. I can see a mouse cursor in game, however when i select a unit, the mouse cursor is gone. When I unselect a unit, the mouse cursor is visible again. Is this normally what happens with the cursor fix?
Random Crashes
by Edward on Sunday June 28th 2009, 11:01
Game works perfect under the new wine versin 1.1.23!
Videos, network, mouse, sound all work. The only problem is I get random crashes. Could be 5 minutes, could be an hour.
