WineHQ
Category: Main Scientific/Technical/Math CAD/CAE AutoCAD 2000 R14 MDT R4

AutoCAD

Release 14/Mechanical Desktop R4 is a mechanical 2D/3D solid modeling version of AutoCAD.

Application Details:

Version: 2000 R14 MDT R4
License: Free to use
URL: http://www.autodesk.com
Votes: Marked as obsolete
Latest Rating: Gold
Latest Wine Version Tested: 4.13-staging

Maintainers: About Maintainership

Test Results

Old test results
The test results you have selected are very old and may not represent the current state of Wine.
Selected Test Results

What works

Everything Drawing Shapes, adding lines,help,saving,etc

What does not

nothing yet

Workarounds

What was not tested

Loading documents

Hardware tested

Graphics:

  • GPU:
  • Driver:

Additional Comments

I am not a expert user of this program.

selected in Test Results table below
Operating systemTest dateWine versionInstalls?Runs?Used
Workaround?
RatingSubmitter
ShowopenSUSE Leap 15.0Aug 14 20194.13-stagingYes Yes YesGoldDavid A. Smith 
ShowopenSUSE 13.2 i586Aug 04 20172.14Yes Yes NoGoldDavid A. Smith 
ShowUbuntu 14.04 "Trusty" amd64 (+ variants like Kubuntu)Sep 10 20151.6.2Yes Yes NoSilverTed Hansen 
CurrentDebian GNU/Linux 6.x "Squeeze" x86_64Sep 11 20111.3.28Yes Yes NoGoldMark 
ShowUbuntu 9.10 "Karmic" i386 (+ variants like Kubuntu)Mar 18 20101.1.35Yes Yes NoSilveran anonymous user 

Known Bugs

Bug # Description Status Resolution Other apps affected
17743 AutoCAD 2008 and AutoCAD Mechanical 2008: Undocked toolbars are displayed incorrectly NEW View

Show all bugs

HowTo / Notes

HOWTO

­by NSLW on (March 26th 2009)

Installing

    1. Use recent version of Wine(tested with Wine­-1.1.17)

    2. Download winetricks by following command

 wget http://www.kegel.com/wine/winetricks

    3. Install required components by following command

sh winetricks corefonts tahoma

    It will take some time because winetricks will download all above components

     4. Change Screen Resolution in Wine configuration by typing

winecfg

    Then go to Graphics tab and change Screen Resolution from 96 to 108

     (workaround given by )
    5. navigate to your AutoCAD R14 CD and run

wine setup.exe

PlayOnLinux way


You can install your AutoCAD R14 using PlayOnLinux (some kind of gui for Wine). I think it's the easiest method because script will tell you step by step what to do. To do so you'll need:

    1. PlayOnLinux

    2. POL Helper plug-in


­­­
WARNING
Do not use Wine 1.1.19 because in this version there is a regression which causes toolbars to be mis-sized.

Comments

The following comments are owned by whoever posted them. WineHQ is not responsible for what they say.

Installation notes for AutoCad R14 on Linux Mint 20.3 and Wine 7
by dhmsjs on Friday August 19th 2022, 20:27
(As of 8/19/22)

You can install both Wine and WineTricks from the standard Mint repository. This installs Wine v5.03 and creates a start menu category for Wine but the WineTricks shortcut link ends up under Accessories. So you may want to move that over to the Wine category. To do this, right-click the start menu button, select Configure, then Menu, then press the "Open the Menu Editor" button.

You can get AutoCad R14 to work well with v5.03 though it may take some extra effort as documented in the HowTo above (not sure). But since v7.0 is the most current stable release as of this writing, these notes assume v7.0.

It turns out that AutoCad R14 installs very easily and runs well under Wine 7.0. BUT there are a few essential steps you must follow! See the AutoCad R14 installation notes below.

To Install Wine 7.0
-------------------

On Linux Mint 20.3, to install Wine v7.0 will require you to install via the command line because even though v7.0 may appear in the Mint Software Manager, Winetricks from the repository is dependent on v5.03 and so as soon as you install WineTricks, the current preferred version reverts back to 5.03. Installing 7.0 via the command line allows it to become the preferred version without disturbing WineTricks.

To install v7.0 via the command line:

1) Add the Winehq repository:

sudo wget -nc -P /etc/apt/sources.list.d/ dl.winehq.org/wine-builds/ubuntu/dists/focal/winehq-focal.sources

2) Update the package cache:

sudo apt update

3) Install the stable version:

sudo apt install --install-recommends winehq-stable

You can check the current version of wine with this command:

wine --version

It should now report version 7.0

When using WineTricks, whenever you see the warning about using a 64 bit Wine prefix, you can just click on Ok to close it.

Note however that AutoCad R14 itself is a 32 bit application, so there is no big advantage in trying to run in a 64 bit environment -- other than it is convenient to have all of your Windows apps installed in the default wine prefix, and you may want that to be 64 bit for some other apps. Fortunately AutoCad R14 will run just fine as a 32 bit app in a 64 bit Wine prefix.

To create a new Wine prefix with WineTricks:
To Install AutoCad 14
---------------------

Before you install from a CD installation disk image, make sure you have available the serial number, CD key and authorization code for your AutoCad installation CD image. You may find these saved in a text file at the top of your installation CD image.

You can install AutoCad R14 in the default prefix or use WineTricks to create a separate prefix just for AutoCad. You can also (as of Wine 7.0 anyway) install it in a 32 or 64 bit prefix (confirmed) and should be able to run it under any Windows version emulation, including Win 10. The default as of this writing is Win 7 and so all steps below assume that.

The key fix can be seen in online posts in AutoDesk and Wine forums from users trying to get R14 to run on Vista and then later versions of Windows. The problem comes from the Smart Heap library SH31W32.DLL (80kb file size, 1997 date). The one packaged with the AutoCad R14 installation disk does not support recursive allocations and apparently even when Wine emulates 32 bit systems some parts of the Windows emulation still need the newer version of SH31W32.DLL (112.7k file size, at least 21 Oct 2003 date or later).

To install AutoCad R14 from an installation CD image under Wine 7.0, follow these steps:

1) Run the Setup.exe install program found on the installation disk, entering your CD key and serial number info when prompted.

2) BEFORE you run AutoCad for the first time, navigate to the AutoCad R14 program directory and replace the original SH31W32.DLL with the newer version. In a default 64 bit Wine prefix this directory will be located in C:\Windows\Program Files (X86)\. In a 32 bit prefix it will be in C:\Windows\Program Files\

If you do run AutoCad before replacing SH31W32.DLL, it will often crash or give you BAD MEM POINTER errors. It also seems to corrupt the installation in subtle ways that can make things still behave badly even after you replace SH31W32.DLL.

3) After SH31W32.DLL is replaced, now you can safely run acad.exe. It should not crash and you should be able to print. On first run it will prompt you to enter the authorization key. Without this the program will lock up after 30 days. Once you have entered the correct authorization code you will not see the prompt again.

If you don't have the installation disk but you do have a working installed image on an existing machine, you should be able to get a working system under Wine anyway:

1) Copy over the entire AutoCad 14 program directory to the appropriate Program Files directory in a Wine prefix.

2) Two required files get placed in Windows\System32 during installation; these are HEIDI3.DLL and GDIFONT3.HDI. So make sure you also transfer them to the new installation's System32 directory.

That should be all you need to do to get AutoCad R14 running under Wine 7.0!
Back