WineHQ
Category: Main Games 1st Person Shooter Quake WinQuake 1.09

Quake

Quake: Software Rendering

Application Details:

Version: WinQuake 1.09
License: Retail
URL: http://www.idsoftware.com/game...
Votes: 0
Latest Rating: Silver
Latest Wine Version Tested: 2.1

Maintainers: About Maintainership

No maintainers. Volunteer today!

Test Results

Old test results
The test results for this version are very old, and as such they may not represent the current state of Wine. Please consider submitting a new test report.
Selected Test Results

What works

Single player, save/load, change resolution

What does not

Music does not play from the Quake CD when inserted in the first optical drive /dev/sr0

Workarounds

What was not tested

Multiplayer

Hardware tested

Graphics:

  • GPU:
  • Driver:

Additional Comments

Rated "Silver" only because Quake will not play the soundtrack from a working mixed mode Quake CD. Emulating the disc by loading an image file into cdemu similarly does not work, and mounting the disc traditionally is not an option because the soundtrack exists in CDDA format. The same cue/bin pair produces music when mounted in dosbox with imgmount, but this is only a solution for dos quake (not Winquake).

selected in Test Results table below
Operating systemTest dateWine versionInstalls?Runs?Used
Workaround?
RatingSubmitter
CurrentArch Linux x86_64Feb 27 20172.1Yes Yes SilverKevin D'Ambrosio 
ShowUbuntu 8.04 "Hardy" i386 (+ variants like Kubuntu)Jul 24 20081.0.0Yes Yes PlatinumJasmine Iwanek 
ShowUbuntu 8.04 "Hardy" i386 (+ variants like Kubuntu)May 31 20081.0-rc2Yes Yes PlatinumSexyBoBo 
ShowFreeBSD 6.2Oct 08 20060.9.21.Yes Yes Goldan anonymous user 
ShowFreeBSD 6.2Oct 08 20060.9.21.Yes Yes Goldan anonymous user 

Known Bugs

Bug # Description Status Resolution Other apps affected

Show all bugs

HowTo / Notes

HOWTO: IPX Multiplayer
To get ipx network support, IPX will have to be enabled in the kernel, and you need some userspace utilities, usually called ipx-utils; and IPX must be started (there should be an initscript).

 *ubuntu users can use the commands:

sudo apt-get install ipx; sudo modprobe ipx; sudo ipx_interface add -p eth0 802.2 0x12345678

(change eth0 for the name of your ethernet/wireless card)

The frame type (802.2) needs to be equal for everyone. It is recommended to use ethernet II instead of 802.2. If playing with computers with Windows, make sure their frame type is set to what you have, and not 'automatic'. It may cause issues if you forget it.

Comments

Comments Disabled

Comments for this application have been disabled because there are no maintainers.
Back