Zilog ZDS II - Z8Encore! 4.11.0 Zilog ZDS II - Z8Encore! 4.11.0

Category: Main > Programming / Software Engineering > Zilog ZDS II - Z8Encore! 4.11.0 > Zilog ZDS II - Z8Encore! 4.11.0

NameZilog ZDS II - Z8Encore! 4.11.0
VersionZilog ZDS II - Z8Encore! 4.11.0
License Free to use
Wine Version1.4.1
Maintainers of this version:
No maintainers. Volunteer today!
The older and more stable of two supported versions by Zilog. Version 5.0.0 was also tested and worked OK.
Old test results
The test results for this version are very old, and as such they may not represent the current state of Wine. Please consider submitting a new test report.
Selected Test Results (selected in 'Test Results' table below)

What works
For developing code, the application works without any problems. For debugging, the USB cable did not work. The Serial Smart cable worked but required some setting up in Linux as follows: 1. Power up smart cable and target board before switching PC on. 2. Check that wine correctly maps COM1 to the selected Serial port. 3. Make sure user belongs to the same group (usually "dialout") as the serial port. 4. Check that the serial port exists and is configured correctly using the "setserial" command.

What does not
USB Smart Cable

What was not tested
Ethernet Smart Cable

Additional Comments

Very minor screen redraw issues
Test Results
DistributionTest dateWine versionInstalls?Runs?RatingSubmitter
CurrentLinux Mint 13 "Maya"Jul 19 20131.4.1 Yes Yes Silver an anonymous user 

Known bugs
Bug # Description Status Resolution Other apps affected


   << Back

Page loaded in 0.12743 seconds.