DragonPad: some voice commands “scratch that” and “correct that” work. Can dictate into notepad, unreliable at times. Can “cut-and-paste” text to linux programs outside of the wine using standard X copy and paste functions. Can save documents in DragonPad and open them with linux native programs: OpenOffice, Abiword, etc. Optimize: dictate some text “correct that” select options -> increase to number of options to 9
What does not
Some voice commands fail, eg. “spell that” crashes Wine.
Some fonts do not work, my font selection is short.
At some point an error dialog box appears:- “COM returned an unexpected error code: Details are c0000005". This can be ignored, no change in performance. Keeps recurring if you clikc “OK”. Just move it aside, select DragonPad and move it over the error message. Problem solved (out of sight, out of mind). Sometimes need to click this OK box to proceed with Dragon.
What was not tested
Dictation into other programs running on wine
|Operating system||Test date||Wine version||Installs?||Runs?||Used|
|Show||Fedora 13||Dec 27 2010||1.3.8||Yes||No||Garbage||winebug|
|Show||Ubuntu 7.04 "Feisty" i386 (+ variants like Kubuntu)||May 12 2008||1.0-rc1||Yes||Yes||Silver||Susan Cragin|
|Show||Gentoo Linux||Sep 07 2006||0.9.20.||Yes||Yes||Silver||winebug|
|Show||Ubuntu 6.06 "Dapper" i386 (+ variants like Kubuntu)||Aug 04 2006||0.9.18.||Yes||No||Garbage||Susan Cragin|
|Current||Ubuntu 6.06 "Dapper" i386 (+ variants like Kubuntu)||May 01 2006||0.9.12.||Yes||Yes||Silver||an anonymous user|
Wine functionality is very unstable from version to version. Close attention needs to be paid to wine versions in the notes below.
Recent wine (eg after version 1.0) has serious bugs that makes DNS 7 useless.
Some tricks are needed to get NS7 installed and to setup the voice training. Awaiting a full howto, here are some notes that may help.Most of the following applies to all WINE releases. See below for further notes on later , 9.x releases and some distro specifics.
Instructions for installing Dragon Naturally Speaking under WINE-0.9.1 to 0.9.25
See the end of THIS note for comments on more recent WINE versions.
Due to the ever-changing nature of the WINE project installation methods rarely port between wine releases.
Due to the landmark release of Wine-0.9 this is a new method deal with more recent vintages of wine.
What you need (what was tested)
Dragon Naturally Speaking v7 prefered (commercial licence)
IE5.5 (84MB freely available)
sidenet installer 1.9.0 (freely available)
DCOM98 (requires windows licence) [Not needed for more recent wine]
comdlg32.dll (requires windows licence - workaround possible)
DCOM98 will be fetched by sidenet
for wine-0.9.1 see your linux distro or winehq.org
Before you start
The following instructions assume you have already installed wine-0.9.1 on your system and are at the command prompt in a terminalwindow under an X window manager, eg gnome , xfce, kde , etc.
neither WINE nor sidenet should be run as root, so if you are logged in as root use the su command or login again as a user.
If you have an existing wine setup , sidenet will rename and leave it untouched, then create a new wine configuration. This is non-destructive and reversible but will mean you no longer have direct access to any programs already installed on wine.
Download sidenet, extract the archive, read the readme, then run it.
Select option  , manual installaton
Only say "y" to DCOM98 and fonts installation
The following assumes you give ~/.wine/c as the install location, if you chose otherwise adjust where required.
Since we have not selected IE6 install this will be very quick.
You should now have a basic working wine-0.9.1 configured to behave like win98
On the audio tab select OSS (not ASLA)
On the graphics tab tick "Emulate a virtual desktop". 800x600 may be better than 640x480 depending on your screen.
On the devices tab check that the device you want to use for Dragon install CD is shown. It not add it.
I prefer to do this from the command line after quitting winecfg, eg:
ln -s /mnt/dvd h:
Click OK to exit winecfg.
Dragon requires some of the functionality or IE5 or later. I found IE6 , although it installs perfectly under wine-0.9.1 did not seem to work with Dragon as it did on earlier wine releases.
I found IE5.5 the best choise. Download the installer from the above link and copy it to ~/.wine/c
run it using wine:
This will install a series of CAB files into a new directory, cd to that location.
chose minimal installation and deselect the help files to save clutter.
This will flash a few blank screens and finally end with a couple off errors:
Registration of c:windowssystem32StdOle2.Tlb successful.
err:wineboot:runCmd Failed to run command L"grpconv.exe -o" (2)
err:wineboot:ProcessRunKeys Error running cmd #2 (2)
they can be ignored.
Installing Naturally Speaking
Insert your Dragon Nat. Speaking CD . If your system does not auto-mount do:
mount /mnt/dvd or the appropriate command for the drive and run the installer:
Enter a user name (any) and your serial number. There is a problem with the "Next" button so just hit the enter key after the serial number.
The installer works fully. You can select the options you want and browse the location you want to install the software.
Say "no thanks" for the register online and the quickstart options.
Again a couple of ignorable errors:
err:wineboot:runCmd Failed to run command L"" (2)
err:wineboot:ProcessRunKeys Error running cmd #1 (2)
err:rundll32:main Unable to load L"-s"
Making the most of Wine
To miminise the number of native dlls and make the most of wine's capabilities, let's configure wine for natspeak.exe
"add application" ... browse to where you installed the software and find Programs/natspeak.exe
Now switch to the libraries tab while natspeak is still selected.
add a new override: enter * and hit Add button.
it will show as * (native,builtin) , use Edit to swap this to (builtin,native)
now add the following DLLs and leave them as native,builtin...
Dragon stupidly tests for the presence of the file comdlg32.dll rather than using the API to load it, so even though the wine one works fine, Dragon refuses to start. This is an MS licenced file so you may wish to avoid it.
this creates a zero length file of that name that fools a startup check of the program.
After that it will work fine off the built-in wine version.
Warning: this will stop winecfg and other software from running so set this to build-in only in the default profile of winecfg first. Alternatively, use the real one if you have it.
Putting the real native dll in system32 will also work around the DNS start up issue, it is not needed by the program.
Voice Training and Dictation
The program should now run and take you straight into voice training for the user name entered during installation.
There are a couple of tricks to get around minor issues here.
The program thinks it can control the mike volume but does not affect it. You will need to set it with alsamixer or some other linux tool before starting.
It is the Mike CAPTURE level that needs setting. Do not confuse with the mike output control
If you have problems with sound you can test by copying sndrec32.exe from a real windows system (98 or win2k tested) and try to do a quick voice recording with that.
Once the mike is set (usually somewhere 70-80% is good) you will move on to the voice training .
At this point you need to click on a button maked GO, but you dont see it (bug). So use Alt-G on the keyboard and you're off.
You should now be able to complete the training session and go straight into dictation.
Find DragonPad on the tools menu. This is the best place to dictate text to.
Dictating to other programs
Running another program under wine at the same time should allow dictating into text areas of the other program although this sometimes stalls the voice rec. if the mouse wanders elsewhere.
None of the voice control of menus and buttons seems to work at this stage.
You can now use cut and paste to copy you text to any X-based linux programs.
Running the prog with wine
open a terminal window, change to the directory where you installed the prog and run
if you cant remember where you installed it use :
find / -iname "natspeak.exe"
Once you have gone through all that setup and training and made it work nicely it may be a good idea to take a snapshot of it in case it gets messed up.
tar cjf dragon-ball.bz2 .wine