WineHQ

Orcad

Application Details:

Version: 10.x
License:
URL: http://www.cadence.com
Votes: 0
Latest Rating: Gold
Latest Wine Version Tested: 1.7.16

Maintainers: About Maintainership

Test Results

Old test results
The test results for this version are very old, and as such they may not represent the current state of Wine. Please consider submitting a new test report.
Selected Test Results

What works

- Capture CIS works perfect.

- OrCAD Layout Plus shows graphic glitches on pads with default configuration, but works 100% perfect if you configure layout.exe to run as Windows 98.

- Specctra works perfect.

What does not

Nothing so far.

Workarounds

What was not tested

Simulation using Pspice.

Hardware tested

Graphics:

  • GPU:
  • Driver:

Additional Comments

I had to downgrade from wine version 1.7.19 to 1.7.16 for Layout Plus to properly parse the license file. Don't know why but license file parsing stopped working since wine version 1.7.17. Other problem I noticed, that also happens under native Windows 7 and Windows 8 (e.g. not Wine, but a real Windows 7 or Windows 8 box): running Capture causes processes cdsMsgServer and cdsNameServer programs to continuously execute and exit in an infinite loop, taking 100% CPU. Workaround for this problem: once you are running Capture, open a terminal and run these two commands (you might need to run them twice): $ killall cdsMsgServer $ killall cdsNameServer These processes will die, you'll get your CPU back and everything will work just fine.

selected in Test Results table below
Operating systemTest dateWine versionInstalls?Runs?Used
Workaround?
RatingSubmitter
CurrentArch Linux x86_64May 30 20141.7.16Yes Yes Golddoragasu 
ShowUbuntu 12.04 "Precise" i386 (+ variants like Kubuntu)Mar 11 20131.4Yes Yes Bronzean anonymous user 
ShowUbuntu 9.04 "Jaunty" i386 (+ variants like Kubuntu)Apr 25 20091.1.19Yes No Garbagean anonymous user 
ShowGentoo Linux x86_64Jun 25 20070.9.39.Yes Yes Goldan anonymous user 
ShowFedora 7 x86_64Jun 23 20070.9.39.Yes Yes Bronze회니 

Known Bugs

Bug # Description Status Resolution Other apps affected

Show all bugs

Comments

The following comments are owned by whoever posted them. WineHQ is not responsible for what they say.

Orcad seems to work better in 1.1.42 and above
by Jeff Carr on Thursday July 22nd 2010, 13:44
There are even some patches for the new 1.2 version (contributed in June 2010) that fix some Orcad crashes.
Orcad 10.x installation (TCP/IP) error
by Indy on Sunday January 18th 2009, 5:38
Hi,

I'm triying to install Orcad 10.5 under wine 1.0.1 (ubuntu 8.10+). I'm getting network failure saying something like:

Error with Network Protocols
The Network protocol installed on this computer eithre cannot be detected or are incompatible with the FLEXlm license manager.

i.e, I cannot even get to setup the license.

Anybody passed this error?

Thanks
RE: Orcad 10.x installation (TCP/IP) error
by Matej on Tuesday March 30th 2010, 13:00
You must install license manager under Windows and then copy the license_manager folder across to wine.
Orcad 10.1
by guillermo on Tuesday January 15th 2008, 17:57
Hi all, Im installing ORcad 10.1 with Wine on debian, and the installation process takes forever, any ideas??
Thanks!
OrCAD Place Part bug
by Jas on Tuesday November 20th 2007, 1:08
Bug 3023 from the 9.x series continues on in the 10.x series of OrCAD used under wine. Same fix applies, in wine 0.9.49, modify dlls/user32/dialog.c to exclude the line "if (hwnd ==
GetActiveWindow()) WINPOS_ActivateOtherWindow( hwnd );) " which is now on line 897 of the file at of this version.
Back